Slim Neck Bottles Spare Parts - Silicone Straw Top Adaptor

Silicone straw top adaptor are great for parents looking to switch their Pigeon Slim Neck Nursing Bottle from nipple to straw.

• Compatible with slim neck nursing bottle 240ml & 250ml
• Soft silicone straw for easy drinking
• Spill proof
• BPA/BPS Free
  

Recommend to change nursing bottles (applicable to all types of materials if using boiling, steam & chemical sterilizations) every 6-12 months for hygiene purposes.

Lifespan of product:
For the silicone nipple, rotate the use of 2 or more nipples for about 2 months before replacing them (boiling, steam and chemical). If you see any stubborn milk stains, scratches or discolouration on the nipple, it is an indication to consider changing to new nursing bottles.

Remove nipple from the screw cap of Pigeon Slim Neck Bottle.
Position the silicone straw top under the screw cap.

Pull the straw top upwards until it snaps into place. Insert lower straw into the straw receiver of the silicone straw top.

Leakage may occur when the bottle is shaken strongly, even with the hood attached.

How to clean the products:
Immediately after use, rinse in warm water and wash using a Pigeon Liquid Cleanser. When cleaning the product, do not use sharp tools for valve and top hole as it may be torn.

Do not leave the straw in direct sunlight or heat. When not in use, place in a dry sealed container. Clean before each use.

Sterilization Method: Boiling, Steam, Chemical

Boiling/Steaming sterilization: Thoroughly wash the nipple, bottle, cap and hood, and place in water. Bring the water to a boil. Sterilize for 5 minutes after the water comes to a boil.

Chemical sterilization and microwave sterilization are possible.Use sterilizing products specifically for baby bottles and nipples. Follow the instructions in the user’s manual for these products. With chemical sterilization, the printing on the bottle may fade.

Caution:
Straws are not suitable for child under 6 months. Continuous and prolong sucking of fluid will cause tooth decay. Always check temperature of drink before feeding. The straw may be worn by biting. Special attention is needed for teething child.

Avoid putting hot liquid, formula milk, or carbonated liquids in the bottle as the air pressure inside the bottle will increase and leakages might occur from the tip of the straw.

1x Silicone Straw Top Adaptor

Part | Material & Heat Resistance:
Silicone Straw Top | Silicone Rubber 120°C
Lower Straw | Polypropylene (PP) 120°C